24×560 2-Line DOB Module
code:
Specifications
| Name: 24×560 2-Line DOB Module | Power: 20 W |
| PCB Material / Thickness: Aluminum / 1mm | DOB Type: Switching |
| LED Number / Package: 84 PCs / 2835 | Luminous Efficacy: 120 ~ 130 Lm/W |
| Maximum Module Temperature: < 85°C | Color Temperature: 3000K, 4000K, 6500K |
| Total Harmonic Distortion (THD): < 140 | Color Rendering Index (CRI): > 80% |
| Nominal Voltage: 175 ~ 265 V | Ambient Temperature: -10 ~ 40 °C |
| Frequency: 50 ~ 60 Hz | Luminous Flux: 2400 ~ 2500 Lm |
| Power Factor: > 0.5 | Lumen Maintenance: > 80% |
| Warranty: 2 Years | Nominal Current: 160 mA |
| Non-Dimmable | Lifespan: 35000 hrs |
| Flicker-Free |
Appearance
| PCB Material /Thickness: Aluminum / 1mm |
| Length × Width : 560mm × 24mm |
| Weight : 50gr |
Features
Features
- SMD connector for easy and fast installation on both sides
- Aluminum board with high thermal conductivity up to 1.5 W/m.K
- Warranty: 2 years (Read warranty conditions)
- Protected against surge voltage, up to 2000 V
- High quality electronic components
- Luminous Efficacy up to 140 Lm/W
- Auxiliary track due to minimum wiring
- High luminous maintenance
- Lifespan: > 35000 hours
- Perfect light uniformity
Advantages
- Environment friendly
- No UV or IR radiation
- Reduced gas emission
- Up to 85% energy saving
- Compatible with human health
- less wire by using auxiliary track on board
- Reduced replacement costs with a lifespan of over 35000 hours
Application
Applications
- Interior
Terms of Safety and Use
- Do not use in places where water may fall
- Allowed ambient temperature: -20 ~ 50 °C
- Do not expose the module to dust and high humidity
- Do not apply mechanical shocks to the isolated module
- It is recommended to use all the screws to fix the module
- Before installing, changing or touching the product, cut off the power
- Due to its very low energy consumption, it is compatible with solar lighting systems
- Make sure that the module temperature does not reach the maximum specified value
- Use suitable and standard screws with a plastic washer to prevent any damage to the module
- Avoid touching the product when it is on or shortly after it is turned off due to high temperature
- Keep modules away from any type of liquid. It is recommended to use isopropyl alcohol (IPA) to clean the module
- Static electricity or surge voltages may damage the LED module. So, use anti-ESD wristbands or gloves when working with them
