30×60 Lux Finger Module
Code: 419
Specifications
Appearnce
| PCB Material /Thickness: Aluminum / 1mm |
| Length × Width : 540mm × 260mm |
| Weight : 195gr |
Features
Features
- SMD connector for easy and fast installation on both sides
- Aluminum board with high thermal conductivity up to 1.5 W/m.°K
- Warranty: 3 years (Read warranty conditions)
- Protected against surge voltage, up to 2000 V
- Luminous Efficacy up to 158 Lm/W
- High quality electronic components
- Compatible with dimmable drivers
- High luminous maintenance
- Lifespan: > 25000 hours
- Perfect light uniformity
Advantages
- Reduced replacement costs with a lifespan of over 25000 hours
- Compatible with human health
- Up to 85% energy saving
-
Reduced gas emission
-
No UV or IR radiation
- Environment friendly
Applications
Applications
- Indoor
- Operation in combination with Radnour or TCI drivers is guaranteed
Terms of Safety and Use
- Static electricity or surge voltages may damage the LED module. So, use anti-ESD wristbands or gloves when working with them
- When modules are wired in parallel, if one of the them fails, the current of the other modules will increase and cause damage
- Keep modules away from any type of liquid. It is recommended to use isopropyl alcohol (IPA) to clean the module
- Avoid touching the product when it is on or shortly after it is turned off due to high temperature
- Use suitable and standard screws with a plastic washer to prevent any damage to the module
- Make sure that the module temperature does not reach the maximum specified value
- Due to its very low energy consumption, it is compatible with solar lighting systems
- Before installing, changing or touching the product, cut off the power
- It is recommended to use all the screws to fix the module
- Do not apply mechanical shocks to the isolated module
- Do not expose the module to dust and high humidity
- Allowed ambient temperature: -20 ~ 50 °C
- Do not use in places where water may fall
