43x43 square DOB module
Product code: 405
Specifications
| Name: LED Module Square DOB 43×43 | Ambient Temperature: -10 ~ 40 °C |
| Power: 7 W |
Standard Deviation Color Matching (SDCM): < 5
|
| Number / Type of LEDs: 14 pcs / 2835 SMD | Material / Board Thickness: Aluminum / 1 mm |
| Color Temperature: 3000K, 4000K, 6500K | Maximum Module Temperature: 85 °C |
| Total Harmonic Distortion (THD): <140 | Color Rendering Index (CRI): > %80 |
| Luminous Efficacy: 90 ~ 105 Lm/W | Rated Voltage: 220 ~ 240 V |
| Luminous Flux: 650 ~ 700 Lm | Lifespan: 35000 hrs |
| Rated Current: 55 mA | Lumen Maintenance: > 80% |
| Warranty : 2 years | Frequency: 50 ~ 60 Hz |
| DOB type: Linear | Power Factor: > 0.55 |
| Non-Dimmable | Flicker-Free |
Appearance
| Material / Board Thickness: Aluminum / 1 mm |
| Length x Width: 43mm x 43mm |
| Weight: 6 gr |
Features
Features
- Aluminum board with high thermal conductivity of 1.5 W/m.°K
- Manufactured under the technical supervision of TCI Italy
- Protection against surge voltage up to 2000 V
- Equipped with linear constant current driver
- Nominal lifespan of more than 35000 hrs
- 2-year warranty (read the warranty terms.)
- Protection against over-temperature
- High quality electronic components
- Luminous efficacy up to 105 Lm/W
- High lumen maintenance
- Uniform light distribution
- Non-Dimmable
- Flicker-Free
Advantages
- Reducing replacement costs with a lifespan of over 35000 hours
- More than 85% energy saving in electricity consumption
- Flicker-free light with reduction of eye fatigue
- Reducing of greenhouse gas emissions
- No ultraviolet and infrared radiation
- Human-friendly
- Eco-friendly
Application
Application
- Interior
Conditions of use and safety
- Static electricity or surge voltage can damage the LED module. Therefore, use an ESD wristband or gloves while working with the LED module.
- Avoid any contact of liquids with the module. It is recommended to clean the module with Isopropyl alcohol (IPA).
- Avoid touching the product when it is on or shortly after turning it off due to high temperature.
- Before installation, replacement, or touching the product, disconnect the electricity.
- Make sure the module temperature does not reach its maximum specified value.
- Due to its low energy consumption, it is compatible with solar lighting systems.
- Allowed environmental operating temperature range: -10 to 40 °C.
- Use plastic gaskets with screws to prevent any damage to the module.
- Allowed voltage range for installation and replacement: 220 to 240 V.
- It is recommended to use all screws to secure the module.
- Avoid mechanical shocks and impacts on the module.
- Do not expose the module to dust and high humidity.
- Do not use with light control equipment (Dimmer)
- Do not use in places with a risk of water fall.
